How to Setup AC1900 MU-MIMO Gigabit Wi-Fi router (DIR-1950-US)? – The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business.
The D-Link Wi-Fi app allows you to install and configure your AC1900MU-MIMO Gigabit Wi-Fi Router (DIR-1950-US) from your compatible Android or IOS device.
Note:-The screenshots may be different depending on your mobile device’s OS version. The following steps show the IOS interface of the D-Link Wi-Fi app. If you are using an Android device, the appearance may be different from that of the screenshots, but the process is the same.
Step 1:- Search and install the free D-Link Wi-Fi app available on the App Store or on Google Play. You can also scan the QR code on the right, which will take you to the respective D-Link Wi-Fi app store page.
Step 2:- Launch the dlinkrouter.local Wi-Fi app from the home screen of your device.
Step 3:- Tap on the Install New Device button at the middle of the screen.
Step 4:- Tap Scan the QR code to scan the setup QR code located in the Quick Installation Card and proceed to step 6. Alternatively, you can tap Continue without scanning to proceed to step 5.
Step 5:- Select Router and select AC1900 MU-MIMO Gigabit Wi-Fi Router (DIR-1950-US) from the list of available devices. Tap Next to continue.
Step 6:- You will now be guided through a step-by-step process for setting up your router. Simply follow the on-screen instructions to continue the installation and the configuration process.
Hardware Setup AC1900 MU-MIMO Gigabit Wi-Fi router (DIR-1950-US)
Step 1:- Position your AC1900 MU-MIMO Gigabit Wi-Fi router (DIR-1950-US) near your Internet-connected modem. Place it in an open area for better wireless coverage
Step 2:-Turn off and unplug the power to your cable or DSL broadband modem. This is required. In some cases, you may need to turn it off for up to five minutes.
Step 3:- Use the Ethernet cable to connect your modem to the port labeled INTERNET on the router.
Step 4:- Plug in and turn your modem back on and wait approximately one minute before proceeding.
Step 5:- Connect the supplied power adapter to the router and a power outlet, press the power button, and wait approximately one minute until the LED indicator on the front of the device changes from orange to solid white.
Step 6:- If you are configuring the router wirelessly from a PC, connect to the Wi-Fi network printed on the label attached to the bottom of your router or in the Quick Installation Card. If you are configuring the router from a PC with a wired Ethernet connection, plug one end of an Ethernet cable into the port labeled 1 on the back of the router, and the other end into the Ethernet port on your computer.
Recent Comments